Conventional NDT
MAGNETIC PARTICLE TESTING (MT)
Course Content :
Principles of magnetism; magnetic fields; induction; permeability and reluctance; magnetization; lines of force, methods of testing; interpretation of indications; demagnetization; practical exercises; methods of assessing sensitivity; instruction writing.
Course Duration :
5 DAYS
Entry Requirements:
No Mandatory Course Entry Requirements.
Training Requirements:
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 40 Hours
The training hours requirement is fulfilled when candidates attend one of recognized training courses of the CB.
Certification requirements :
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 3 Months
Certification will not be issued until successful completion of the examination and the required experience is achieved.
Course Objectives:
- To explain the basic principles of magnetic particle inspection methods
- To carry out magnetic particle inspection
- To write clear and concise inspection instructions and test reports
- To meet syllabus requirements for ISO 9712 Level 2.
Fees & Training Calendar:
Level 2: ₦ 240,000 + VAT
PENETRANT TESTING (PT)
Course Content :
Materials, methods, compatibility of materials, equipment and safety aspects; practical exercises; methods of assessing sensitivity, Interpretation and evaluation, reporting, instruction writing.
Course Duration :
5 DAYS
Entry Requirements :
No Mandatory Course Entry Requirements.
Training Requirements :
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 40 Hours
The training hours requirement is fulfilled when candidates attend one of recognized training courses of CB.
Certification requirements :
The minimum duration for experience prior to or following success in the qualification examination is:
- Level 2 – 3 months
Certification will not be issued until successful completion of the examination and the required experience is achieved.
Course Objectives:
- To explain the basic principles of penetrant inspection methods
- To carry out penetrant inspection using solvent-removable, water-washable and post-emulsifiable/removal processes
- To write clear and concise inspection instructions and test reports
- To meet syllabus requirements for ISO 9712 Level 2
Fees & Training Calendar:
Level 2: ₦240,000 + VAT
RADIOGRAPHIC FILM INTERPRETATION (RTFI)
Course Content :
Weld defects and their components; viewing conditions, identification of radiographs; spurious indications and film artefacts; appreciation of radiographic principles and parameters of interpretation; standards for radiographic practice; interpretation tutorial; acceptance criteria.
Course Duration :
7 DAYS
Entry Requirements :
No mandatory course entry requirements.
Certification requirements :
The minimum duration for experience prior to or following success in the qualification examination is:
- Level 2 – 6 months
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 120 hours
Certification will not be issued until successful completion of the examination and the required experience is achieved.
Course Objectives:
- To explain the basic theory of radiography
- To state origin of defects
- To state basic radiation safety principles
- To explain principles relating to selection of films, energy levels and techniques
- To evaluate radiographic sensitivity
- To recognize and differentiate between film artefacts and defect indicators
- To interpret radiographs
- To meet the syllabus of ISO 9712 Level 2
Fees & Training Calendar:
Level 2: ₦300,000 + VAT
RADIOGRAPHY TESTING (RT)
Course Content :
Welding processes and weld defects; properties of X- and gamma-rays; sensitometry; film selection; film processing and spurious indications; factors controlling contrast and definition; X- and gamma-ray equipment; ionizing radiation hazards; regulations; use of screens and filters; selection of angle of aspect; image quality indicators; defect depth location; castings; reporting.
Course Duration :
12 DAYS
Entry Requirements :
Must hold, as a minimum, a Basic Radiation Safety qualification
Training requirements :
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 120 hours
The training hours requirement is fulfilled when candidates attend one of recognised training courses of CB.
Certification requirements :
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 120 hours
Certification will not be issued until successful completion of the examination and the required experience is achieved.
Course Objectives:
- To explain the basic theory of X – and gamma radiography
- To select film type and energy levels, select and prepare techniques for a given specimen
- To state the theory of film processing and carry out practical dark-room work
- To have a working knowledge of basic radiation safety
- To plot and evaluate film characteristics (sensitometry)
- To recognize film faults
- To meet the syllabus requirements for ISO 9712 Level 2
- To understand and apply digital processing processes (SAFT, linearization, averaging, filters etc)
Fees & Training Calendar:
Level 2: ₦450,000 + VAT
ULTRASONIC TESTING (UT)
Course Content :
Basic principles of sound; generation and detection of sound; behavior of sound in a material; the flaw detector; use of angled beam probes for weld scanning; welding processes and weld defects; practical exercises on test specimens containing simulated flaws; examination of parent plate, butt welds; instruction writing.
Course Duration :
12 DAYS(120 hours)
Entry Requirements :
No mandatory course entry requirements.
Training requirements :
The minimum required duration of training, which includes both theoretical and practical elements, is:
- Level 2 – 120 hours
The training hours requirement is fulfilled when candidates attend one of recognised training courses of CB.
Certification requirements :
The minimum duration for experience prior to or following success in the qualification examination is:
- Level 2 – 120 hours
Certification will not be issued until successful completion of the examination and the required experience is achieved.
Course Objectives:
- To explain the theoretical background of the techniques
- To calibrate ultrasonic equipment
- To measure the thickness of steel plates and determine levels of attenuation
- To locate and evaluate laminations
- To select the correct type of probe to examine welded butt joints in steel plate and aerospace components/structures
- To report on the location and size of defects in typical welded butt joints
- To interpret code requirements
- To meet the syllabus requirements for ISO 9712 Level 2.
Fees & Training Calendar:
Level 2: ₦450,000 + VAT